4wd/Suv/Jeep Winch 6000LB
Single line rated pull: 6000lb (3310kg)
Motor: 4.5hp/3.3kw, series wound 12V
Control Remote switch: 12ft (3. 7m) lead
Gear train: 3 stage planetary
Gear reduction ratio: 191:1
Clutch: key way cam clutch
Braking: Automatic load-holding brake
Drum size: Diameter 63.5mm*Length 136.5mm
Cable: 20m of Ø7.2mm
Fairlead: 4-way roller fairlead
Remote control switch: Included
Wireless Remote control: Included
Battery Recommended: 650 CCA minimum for winching
Battery leads: 2 gauge, 72” (1.83m)
Finishing: Black/dark grey coating
Overall dimension (length*width*height): 427*160*214mm
Mounting bolt pattern: 166.5*114.3mm
Packing: Thick foam packing:1PCS/CTN
Q: What maintenance is required?
A little preventative maintenance will ensure a long winch life. You should regularly lubricate all grease points, inspect all bolts, all electrical connections (even at the battery) and cable. Check to ensure there is no worn coatings or corrosion on electrical connections, and that all connections are tight. Check for wear, flat spots and broken strands on your wire rope. Damaged or worn cable should be replaced.
Q:How much pulling power do I require?
You need a winch to be powerful enough to pull your vehicle while overcoming the added resistance caused by an obstacle, moving water, mud, snow or sand on a steep hill. Choose a winch with a maximum line pull of at least 1.5 times greater than the gross vehicle weight.
Q. Can I increase the line speed of my worm gear winch?
Yes, but you will lose about half of your pulling power. On electric winches, a simple exchange of gears can provide up to a 50% line.